About Aluminums
AMS4341 Rev H is the SAE Aerospace Material Specification for aluminum alloy 7050 extrusions in the T73511 temper (6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr, composition similar to UNS A97050). It covers extruded bars, rods, wire, profiles and tubing 5.000 inches (127.00 mm) and under in nominal diameter or thickness and 32 square inches (206 cm²) and under in cross-sectional area. The material is solution heat treated, stress relieved by stretching to a nominal permanent set of 1.5%, straightened and overaged to the T73511 temper. These extrusions are used for structural applications that require a combination of high mechanical properties and good resistance to stress-corrosion cracking. Minimum longitudinal tensile properties are 70.0 ksi (483 MPa) tensile strength, 60.0 ksi (414 MPa) yield strength at 0.2% offset, and 8% elongation in 4D (7% in 5D). Nominal composition is 5.7–6.7% zinc, 2.0–2.6% copper, 1.9–2.6% magnesium and 0.08–0.15% zirconium, with aluminum remainder. ALC Trading supplies AMS4341 7050-T73511 extrusions for aerospace and defense programs; the specification document is available on this page.
